Fiberthree PA-CF Lite

179.99347.99 Incl. BTW

Fiberthree PA-CF Lite is een zeer sterk materiaal met een relatief goede vochtbestendigheid. Dit polyamide filament is versterkt met carbonvezels die de prints extra sterkte, stijfheid en slagvastheid geven. Door de beperkte krimp tijdens het printen kan Fiberthree PA-CF Lite ook geprint worden op 3D-printers zonder afgesloten en verwarmde printkamer. Dit materiaal moet op lage snelheid geprint worden.

De levertijd van dit product is ca. 4-7 werkdagen.

Artikelnummer: N/B Categorieën: , , ,

Beschrijving

Technical filament from polyamide modified for 3D-printing in FFF with additional carbon fibers.

Material Properties

The carbon fibers reduce the shrinkage and the warping behaviour extremely. Material shows excellent strength with remaining impact resistance.
Recommended for all parts with good heat- and media resistance where light weight or high strength matters.
Printed parts show an excellent matte surface finish.
The material differs in the print process from F3 PA-CF Pro in reduced moisture sensitivity and need for much more heat intake in the hotend for proper layer adhesion.
The stiffness of the filament should be considered for the pipes and the feeder system of the printer to avoid breaking.

Handling Notes

The carbon fibers are electrical conductive.
The use of wear-resistant nozzles is highly recommended. The material has to be kept dry for reliable print results under all conditions.
Materialen
Aanbevolen print temperatuur 275ºC - 295ºC
Aanbevolen bed temperatuur 70ºC - 80ºC
Krimp Weinig
Glass Transition Temperatuur 87ºC
Dichtheid 1,24g/cm3
Heat Deflection Temperatuur 90
Vulling Carbon fiber